25
SECTION 2
Display:
(See Figure B)
The top line on the LCD display represents the blade’s current elevation. In the top-left corner of the display,
blade height is shown as a decimal value to the hundredths decimal place. See Figure B. On the top-right of the
LCD display is the current blade elevation, displayed to the nearest fractional value. WHILE SAWING, THIS IS
ONLY A REFERENCE. THOUGH THE FRACTIONAL DISPLAY IS ROUNDED, THE SETWORKS COMPUTER
KNOWS EXACTLY WHERE IT IS TO A MUCH GREATER DEGREE OF ACCURACY THAN IS SHOWN ON
THIS DISPLAY. For example, if the computer makes a core of 3 1/16”, then because the fractional part of the
display is rounded to a resolution of no more than 1/8”, it is possible that the fractional display will jump from 3”
to 3 1/8”. On line two the word SET is shown with its current selected value, as indicated in Figure B. Directly
before the equal sign, on line two, is an active SET number, and after the equal sign is the value of that SET. Next
is CORE, its number and value proceeding exactly as the SET line above. Last on the display is Ref (abbreviation
for “Reference”) on the left and ABS (abbreviation for “Absolute”
on the right.
Figure B
Line 1
Line 2
Line 3
Line 4
Содержание BP Dominator 3650E
Страница 10: ...10 Machine Safety Decals Operators Should Adhere to ALL Safety Warnings...
Страница 32: ...32 Finished Product Figure 28 7 x 9 x 8 6 Hardwood Railroad Ties 4 4 Hardwood Lumber 1 1 16 x 6 x 8 6...
Страница 66: ...66 BP Dominator Electrical Drawing High Voltage...
Страница 67: ...67 BP Dominator Electrical Drawing Low Voltage...