Baker Hughes Waygate Everest Ca-Zoom HD, Руководство по эксплуатации

Страница: 39 / 85

Everest Ca-Zoom HD
3068-7-0001 Rev. d Version 1.0 Page 6-1
6 Interconnection
6.1 Connectors and fittings
Push-pull connectors
The cylindrical push-pull connectors include a self-latching system to ease the
mate and unmate of the connectors.
To connect the cylindrical push-pull connectors:

Line up the red dot on the connector shell with the red index mark on the
socket

Push the connector in axial direction to engage the latches.
CAUTION
If a connector does not easily fit into the socket, it can incite the
operator to apply too much force. As a result, pins can be
seriously damaged (cable might be sent for repair or replaced
by a new one).
If a connector does not engage the latches within the socket,
never apply more pressure than usual. Re-check the correct
orientation of the shell and the axial alignment of the pins.
To disconnect the cylindrical push-pull connectors:

Pull on the outer shell release sleeve of the connector to disengage the latch.

Remove the connector from the socket.