Baker Hughes Masoneilan SVI3, Быстрый старт

Страница: 6 / 24

6 | Baker Hughes © 2021 Baker Hughes Company. All rights reserved.
Mounting Procedure of SVI3 on Rotary Control Valves
This section describes the procedure for mounting the SVI3 on rotary control valves that have
less than 60° rotation, such as the
Camflex ™.
Tools required:
• 3/16” Hex Key
• 5/32” Hex Key
• 3mm, 4mm, 5mm Hex Key
1. Attach the SVI3 rotary mounting bracket to the valve actuator with two 5/16 - 18 UNC flat-
head cap screws and tighten using 3/16” Hex Key as shown in Figure 3. Always position
the long end of the bracket towards the gauges of the positioner to provide a horizontal SVI
installation.
Mounting Bracket
Mounting
Screw
Magnet Extension
Figure 2 - SVI3 Mounted on Camflex Valve
Figure 3 - Camflex Mounting Bracket
Mounting Bracket