Baker Hughes Masoneilan SVI3 Скачать руководство пользователя страница 2

2  |  Baker Hughes

© 2021 Baker Hughes Company. All rights reserved.

THESE INSTRUCTIONS PROVIDE THE CUSTOMER/OPERATOR WITH 

IMPORTANT PROJECT-SPECIFIC REFERENCE INFORMATION IN ADDITION 

TO THE CUSTOMER/OPERATOR’S NORMAL OPERATION AND MAINTENANCE 

PROCEDURES. SINCE OPERATION AND MAINTENANCE PHILOSOPHIES VARY, 

BAKER HUGHES COMPANY (AND ITS SUBSIDIARIES AND AFFILIATES) DOES 

NOT ATTEMPT TO DICTATE SPECIFIC PROCEDURES, BUT TO PROVIDE BASIC 

LIMITATIONS AND REQUIREMENTS CREATED BY THE TYPE OF EQUIPMENT 

PROVIDED. 
THESE INSTRUCTIONS ASSUME THAT OPERATORS ALREADY HAVE A 

GENERAL UNDERSTANDING OF THE REQUIREMENTS FOR SAFE OPERATION 

OF MECHANICAL AND ELECTRICAL EQUIPMENT IN POTENTIALLY HAZARDOUS 

ENVIRONMENTS. THEREFORE, THESE INSTRUCTIONS SHOULD BE 

INTERPRETED AND APPLIED IN CONJUNCTION WITH THE SAFETY RULES 

AND REGULATIONS APPLICABLE AT THE SITE AND THE PARTICULAR 

REQUIREMENTS FOR OPERATION OF OTHER EQUIPMENT AT THE SITE.
THESE INSTRUCTIONS DO NOT PURPORT TO COVER ALL DETAILS OR 

VARIATIONS IN EQUIPMENT NOR TO PROVIDE FOR EVERY POSSIBLE 

CONTINGENCY TO BE MET IN CONNECTION WITH INSTALLATION, OPERATION 

OR MAINTENANCE. SHOULD FURTHER INFORMATION BE DESIRED OR 

SHOULD PARTICULAR PROBLEMS ARISE WHICH ARE NOT COVERED 

SUFFICIENTLY FOR THE CUSTOMER/OPERATOR’S PURPOSES THE MATTER 

SHOULD BE REFERRED TO BAKER HUGHES.
THE RIGHTS, OBLIGATIONS AND LIABILITIES OF BAKER HUGHES AND THE 

CUSTOMER/OPERATOR ARE STRICTLY LIMITED TO THOSE EXPRESSLY 

PROVIDED IN THE CONTRACT RELATING TO THE SUPPLY OF THE EQUIPMENT. 

NO ADDITIONAL REPRESENTATIONS OR WARRANTIES BY BAKER HUGHES 

REGARDING THE EQUIPMENT OR ITS USE ARE GIVEN OR IMPLIED BY THE 

ISSUE OF THESE INSTRUCTIONS.
THESE INSTRUCTIONS ARE FURNISHED TO THE CUSTOMER/OPERATOR 

SOLELY TO ASSIST IN THE INSTALLATION, TESTING, OPERATION, AND/OR 

MAINTENANCE OF THE EQUIPMENT DESCRIBED. THIS DOCUMENT SHALL NOT 

BE REPRODUCED IN WHOLE OR IN PART WITHOUT THE WRITTEN APPROVAL 

OF BAKER HUGHES.

Содержание Masoneilan SVI3

























Отзывы: