Masoneilan 535V Reducing and 535V-50 Differential Pressure Regulators Manual | 3
© 2021 Baker Hughes Company. All rights reserved.
Safety Information
Important –
Please read before installation
These instructions contain
DANGER
,
WARNING
, and
CAUTION
labels, where necessary, to alert you to safety related
or other important information. Read the instructions carefully
before
installing and maintaining your regulator.
DANGER
and
WARNING
hazards are related to personal injury.
CAUTION
hazards involve equipment or property damage. Operation
of damaged
equipment can, under certain operational
conditions, result in degraded process system performance
that can lead to injury or death. Total compliance with all
DANGER
,
WARNING
, and
CAUTION
notices is required for safe
operation.
This is the safety alert symbol. It alerts you to potential personal
injury hazards. Obey all safety messages that follow this symbol to
avoid possible injury or death.
Indicates a potentially hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in serious injury.
Indicates a potentially hazardous situation which, if not avoided,
could result in minor or moderate injury.
When used without the safety alert symbol, indicates a potentially
hazardous situation which, if not avoided, could result in property
damage.
Note: Indicates important facts and conditions.
About this Manual
•
The information in this manual is subject to change without
prior notice.
•
The information contained in this manual, in whole or part, shall
not be transcribed or copied without Baker Hughes’s written
permission.
•
Please report any errors or questions about the information in this
manual to your local supplier.
•
These two models are the “Microflow” range of the 500 Series
Regulators.
•
These instructions are written specifically for the Masoneilan
Models 535V Reducing and Models 535V-50 Differential
Pressure Regulators, and do not apply for other regulators
outside of this product line.
•
These two models are the “Microflow” range of the Masoneilan
500 Series regulators.
•
Refer to Instructions No 31593 for connecting, adjustment and
maintenance of the Masoneilan 10900 Series actuators equipping
the 500 Series regulators.
Useful Life
The current estimated useful life period for the Masoneilan
r e g u l a t o r s m o d e l s 535V and 535V-50 is 25+ years. To
maximize the useful life of the product, it is essential to conduct
annual inspections, routine maintenance and ensure proper
installation to avoid any unintended stresses on the product. The
specific operating conditions will also impact the useful life of the
product. Consult the factory for guidance on specific applications if
required prior to installation.
Spare parts
When performing maintenance, always use Masoneilan
replacement parts. Parts are obtainable through your local Baker
Hughes Representative or Spare Parts Department. When
ordering parts, always include Masoneilan Model and serial
numbers shown on serial plate.
After sales Department
Baker Hughes has a highly skilled After Sales Department
available for start-up, maintenance and repair of our regulators
and components parts. Contact the nearest Masoneilan Sales
Office or Representative.
Training
Baker Hughes regularly holds training seminars for technicians in
its factory. Please contact your local Masoneilan Representative
or our Training Department.
Note: Care must be exercised when unpacking the regulator
to prevent damage. Should any problems arise, contact After
Sales Department. Be sure to include Masoneilan Serial and
Model numbers in all correspondence.
Warranty
Items sold by Baker Hughes are warranted to be free from defects in
materials and workmanship for a period of one year from the date
of shipment, provided said items are used according to Baker Hughes
recommended usages. Baker Hughes reserves the right to
discontinue manufacture of any product or change product materials,
design
or specifications without notice.
Note: Prior to installation
The regulator must be installed, put into service and
maintained by qualified and competent professionals who
have undergone suitable training.
All surrounding pipelines must be thoroughly flushed to
ensure all entrained debris has been removed from the
system.
Under certain operating conditions, the use of damaged
equipment could cause a degradation of the performance of
the system which may lead to personal injury or death.
Changes to specifications, structure, and components used
may not lead to the revision of this manual unless such
changes affect the function and performance of the product.
