Baker Hughes Druck PACE, Руководство по калибровке

Страница: 7 / 26

Copyright 2010 Baker Hughes Company.
English–PACE Calibration Manual | 3
Associated Publications
The following table lists the Druck publications referenced in this manual:
1. Introduction
PACE controllers and indicators incorporate a calibration facility. For the PACE to stay within
specification, a calibration check should be carried out at chosen intervals. If the as found
calibration data of the PACE is not within the permissible deviation, carry out a calibration
adjustment.
2. Calibration Status
The Measured Pressure/Instrument Status menu displays the calibration status of the
instrument on the front panel screen. The Calibration History lists the dates of the stored
calibration corrections.
Note:
The Date and Time must be set correctly in the
Measured Pressure/Global Set-
up/Calibration menu.
3. Calibration Equipment
The original Druck Calibration Certificate shows the measurement uncertainty of the original
pressure calibration standard. To preserve uncertainty of the PACE calibration, checks and
adjustments must be performed using a calibrator uncertainty of less than or equal to the original
pressure calibration standard.
m Metre
mbar millibar
Pa Pascal
PACE Pressure Automated Calibration Equipment
psi Pounds per square inch
REF Reference
SCPI Standard Commands for Programmable Instruments
°C Degrees Celsius
°F Degrees Fahrenheit
+VE Pressure input
Publication Title
K0467 PACE1000 Quick Start and Safety Instructions
K0470 PACE1000 User Manual
K0447 PACE5000/6000 User Guide and Safety Instructions
K0443 PACE5000/6000 Pressure Control Module User Manual
K0476 PACE Pressure Control Module User Guide and Safety Instructions
K0469 PACE Heritage Communications Manual
K0472 PACE Series SCPI Manual
Abbreviation Description