Bakcou Kodiak AWD, Сборка

Страница: 4 / 7

BAKCOU.COM
5.
For further assistance, go online for helpful instructional videos at bakcou.com
FRONT FENDER & HEADLIGHT INSTALLATION
23. Attach front fender and headlight to front fork bracket using
the long bolt from hardware package, 5mm Allen wrench, and
10mm wrench. Slide bolt through headlight bracket, then slide
through front fork bracket and tighten with washer and nut from
hardware package. (Note: Place bracket on the backside of the
fork bracket.)
24. Connect headlight cable connection to controller connection
(both connections have red tips).
PUTTING ON PEDALS
18. Remove pedals from “Took Kit” box.
19. Differentiate the right pedal from the left pedal by locating the small
“L” (for the left) and “R” (for the right) inscribed on the bolt of the
pedal. (See Picture)
20. Attach right pedal by screwing into right crank in a clockwise pattern
using 15mm wrench.
21. Attach left pedal by screwing into left crank in counterclockwise
pattern using 15mm wrench.
22. Make certain crank bolts are tightened using 8mm Allen wrench.