2
BAK Thermoplastic Welding Technology AG
SAFETY
Danger to life
when opening the device as live components
and connections are exposed. Unplug the device before
opening it.
Danger of fire and explosion
if the device is used
incorrectly. Demonstrate the necessary caution when using
the welding machine near combustible materials. Never use
the device in inflammable areas.
Danger of burns
Do not touch the hot air device when it is still hot. Let the
device cool down.
Connect the device to a
socket with protective earth
conductor
. Any interruption of the protective earth
conductor within or outside the device is dangerous! Only
use extension cables with protective earth conductor and a
minimum diameter of 2.5 mm².
The
voltage rating
stated on the nameplate must correspond
to the mains voltage.
Consult your local electricity supplier if necessary.
For personal protection, the device must be connected to a
residual current circuit breaker before using it on
construction sites.
Do not leave the device unobserved.
Hot air radiation of
the hot air device may ignite combustible materials. Heat
may reach inflammable materials that are not visible or
obvious.
Protect the device from damp and wet!
