How to Ride Your Bike
Starting The Engine :
•
Turn the fuel tap knob to ‘
ON
’ or ‘
RES
’
position.
•
Switch ‘ON’ ignition & ‘Kill Switch’
•
Confirm that transmission is in neutral.
•
Fold R.H side rider footrest.
•
Keep throttle completely closed, press
starter button “ ” / apply kick to start the
engine.
•
Release starter button / kick lever as soon
as engine starts.
•
Open R.H side rider footrest back to its
position.
Warning :
During kick starting if rider
footrest is not folded, kick lever hits the
footrest and severe jerk would get
experienced at foot. Also rider step holder
would get damaged due to impact.
Caution :
Do not operate the starter
continuously for more than 5 seconds
otherwise battery would get discharged.
Wait 15 sec. between each operation of
the starter which will facilitate battery to
recover.
Note :
Do not let the engine idle longer than 3
minuets otherwise it will overheat.
Note :
The motorcycle is equipped with a
clutch switch.
The engine can be started by self starter in
any gear if the clutch lever is pressed.
Referance Image.
15
• If the engine is cold or when starting for first
time, use choke
‘ ’
for quick starting.
• When the engine is
warmed up enough to
idle without using
choke, return the
choke to OFF
position.
Manual Choke
ON
OFF
Содержание Pulsar 135 LS
Страница 35: ...33...
