18
WARNING
NEVER REMOVE THE STRIP OF CAPS NOR
ADD ANY WATER OR ELECTROLYTE.
Red
+
Black -
Figure 27
Battery
Compartment Bolts
BATTERY INSTALLATION
How to Initially Charge the battery:
1. Connect the red positive (+) cable to
the red positive (+) pole of the battery.
(see figure 24)
2. Connect the black negative (-) cable
to the black negative (-) pole of the
battery. (see figure 25)
Note: The red positive (+) cable has a
larger diameter than the black negative
y cable.
3. Charging rate: Charge battery @ 0.7
Amps for
5 ~ 10 hours.
•
After charging is complete, install
securely all six battery caps (see
figure 26)
•
Install battery into battery tray
located under seat (see figure 27).
•
Once battery is firmly seated in
tray, attach red positive (+) wire
to positive (+) terminal on battery,
then attach black negative (-) wire to
negative (-) terminal on battery (see
figure 27)
Figure 25
Figure 24
Figure 26
