46
INSPECTION AND MAINTENANCE
How to Initially Charge the battery:
1. Connect the red positive (+) cable to the red
positive (+) pole of the battery.
(see figure 23)
2. Connect the black negative (-) cable to the
black negative (-) pole of the battery. (see
figure 24)
Note: The red positive (+) cable has a larger
diameter than the black negative (-) cable.
3. Charging rate: Charge battery @ 0.7 Amps for
5 ~ 10 hours.
• After charging is complete, press down
firmly with both hands to seat the caps.
(Do not pound or hammer.) The battery is
now sealed. (see figure 25)
• Locate battery compartment on ATV.
The battery compartment is located
under the seat. (see figure 26)
• Attach red positive (+) cable to positive
(+) terminal on battery. Then attach
black negative (-) cable to negative (-)
terminal on battery.
• Secure battery with battery strap and
replace the seat.
WARNING
NEVER REMOVE THE STRIP OF
CAPS NOR ADD ANY WATER OR
ELECTROLYTE.
Figure 25
Figure 24
Figure 23
Figure 26
Battery strap