20
STARTING THE ENGINE
Before attempting to start the engine, make sure to
follow these steps.
1. Turn the key switch to the “ON” position.
2. Set the engine stop switch to the “RUN“
position.
3. If engine is cold, set choke lever to the up (on)
position.
4. Apply the rear brake lever and make sure that
the rear wheels are in locking condition.
5. Press the yellow starter button “START” to start
the engine.
6. After engine has warmed up, set choke to down
(off) position.
ON
OFF
Ignition key
switch
RIDING YOUR ATV
Choke Lever
WARNING
The ATV could start moving as soon as you start the engine.
Unexpected movement could cause you to lose control of the ATV.
Be sure to set brake before starting the engine.
RUN
Engine stop
switch
OFF