4 — English
©
2010 Baja, Inc. All Rights Reserved.
NOTE:
Having two people available will make the assembly
process easier, even if using an overhead hoist.
Cut packing straps and remove cardboard carton from
metal frame.
WARNING:
Do not stand at the front or the rear of the ATV while the
straps are being cut. Keep the carton level while lifting and
do not allow it to tip forward or backward. Failure to follow
these instructions could result in serious personal injury.
Remove box which contains manufacturer’s statement of
origin, assembly guide, operator’s manual, and assembly
hardware.
Remove all bolts, brackets and ties that attach the metal
shipping crate to the ATV.
See figure below.
Remove tires from shipping crate.
Remove bolts from the bottom on both sides of shipping
crate.
With a person on each side, carefully lift shipping crate
off the ATV and set aside.
NOTE:
If a second person is unavailable, use an overhead
hoist to lift and remove the metal frame.
WARNING:
Carefully support the crate at all times during the removal
process. Allowing the crate to drop could cause serious
injury and/or damage the ATV.
Remove and set aside all packaging and wrap from unit
and parts. Do not discard the packing material until you
have carefully inspected and satisfactorily operated the
product.
Remove and discard ties securing handlebars.
WARNING:
Do not use this product if any parts on the Loose Parts List
are already assembled to your product when you unpack
it. Parts on this list are not assembled to the product by
the manufacturer and require customer installation. Use
of a product that may have been improperly assembled
could result in serious personal injury.
Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
If any parts are damaged or missing, please call
1-888-863-2252 for assistance.
UNPACKING
