Bailey ADVANCE 2019 Скачать руководство пользователя страница 160

Страница: 160 / 178

156

HEKI R

OOF LIGHT

Sing

the

ini

eki

To Open

1. Squeeze the black section of the handles

down into the white section of the handles.

2. Push the roof light upwards.
3. To achieve the tilt half opening position,

only push one side of the rooflight
upwards.

To Close

4. To close repeat the above steps in reverse.

Roof light Maintenance

Clean roller blinds with mild soap and plenty

of water.

The roof dome may cloud over in
bright sunshine. It will become clear

again as soon as it cools down.

Safety

• If faults or disturbances occur, consult a

specialist workshop immediately.

• Risk of breakage, do not tread on the acrylic

dome.

• Before starting your journey, check that the

roof window is locked properly.

• Before starting your journey, check the roof

window for damage (such as tension cracks
in the acrylic).

• Do not open the roof window while driving.
• Do not open the window in strong wind or

rain.

• Close the roof window if it rains or snows.
• Do not leave the vehicle with the roof

window open.

• Keep the roof window free of snow and ice.

Maintaining and cleaning the Heki Roof lights

Do not use any sharp or hard objects
for cleaning since they may damage
the acrylic. Only use cleaning
agents that are approved by the
manufacturer.

It is recommended that any elevating
roofs be raised when the motorhome
is used for habitation purposes.

Содержание ADVANCE 2019



















































































































































































Результаты поиска

Содержание ADVANCE 2019

Отзывы:

Бренды по названию

Популярные бренды

Bailey ADVANCE 2019, Руководство пользователя

Результаты поиска

Содержание ADVANCE 2019

Отзывы:

Бренды по названию

Популярные бренды