Baileigh SH-70250-HD, Руководство оператора

Страница: 3 / 28

1
1
LUBRICATION AND MAINTENANCE
•
Check daily for any unsafe conditions and fix immediately.
•
Check that all nuts and bolts are properly tightened.
•
On a weekly basis clean the machine and the area around it.
•
Lubricate threaded components and sliding devices.
•
Apply rust inhibitive lubricant to all non-painted surfaces.
Note: Proper maintenance can increase the life expectancy of your machine.
Machine Lubrication
The main lubricating positions of machine:
Cutting Beam roller bearings Calcium-based grease 2000 hours
Rolling surface of rollers and guides Calcium-based grease 40-50 hours
Lead screws, chain and guiding groves Calcium-based grease 40-50 hours
Exposed wear surfaces and bare metal parts Calcium-based grease 40-50 hours
Blade Changing and Grinding
It is very important to grind the blade edges regularly. Long time use of blade, with no grinding,
will increase the cost of grinding, and shorted the blade life as a whole. Continuous shearing
with blunt cutting edges, will cause the outer crystal grains of the blade to be damaged under
the excessive pressure.
Through the grinding of cutting edges, the outer layer of the damaged crystal grains can be
removed. For this, a schedule for blade edges grinding should be made based upon actual
production material and schedule.
The following schedule for cutting edge grounding is recommended:
•
Cutting edge change after 80-100 working hours for blade;
•
Cutting edge grounding after 320-400 working hours for blade. There are 4 cutting edges for
the each of blades equipped on the machine.
WARNING:
Make sure the electrical disconnect is OFF before working on
the machine.
Maintenance should be performed on a regular basis by qualified personnel.
Always follow proper safety precautions when working on or around any machinery.