Baileigh DP-1250VS-HS, Руководство оператора

Страница: 30 / 52

27
Greasing the Machine
•
Grease the gear rack on the column to keep the table moving
smoothly.
•
Lubricate the spline of the spindle and the teeth of the quill with a #2
grease.
Accessing and Cleaning the Coolant System
1. Clean the drain screen.
2. Drain and wash out the dirt and debris from the reservoir
3. Replace coolant drain plug.
4. Thoroughly clean the pump and pump inlet
5. Re-fill tank with coolant solution.
Accessing and Cleaning the Coolant System
•
Clean the drain screens on the machine base and the drains on the ends of the table.
•
Drain and wash out the dirt and debris from the reservoir
•
Thoroughly clean the pump and pump inlet
•
Re-fill tank with coolant solution.
Oils for Lubricating Coolant
Any 10:1 (water to coolant) solution will work, however we recommend Baileigh B-Cool 20:1
(water to coolant) biodegradable metal cutting fluid. It has excellent cooling and heat transfer
characteristics, is non-flammable, and extends tool and machine life. Each gallon of concentrate
makes 21 gallons of coolant.
Storing Machine for Extended Period of Time
If the drill press is to be inactive for a long period of time, prepare the machine as follows:
•
Disconnect the electrical supply from the power panel.
•
Empty and clean the coolant reservoir.
•
Clean and grease the machine.
•
Cover the machine.
Drain
Grease