Baileigh DP-1250VS-HS, Руководство оператора

Страница: 23 / 52

20
SET UP AND ADJUSTMENTS
Adjusting the Machine Head Height
The machine head is lowered for shipping and must be
raised before operating.
1. Unlock the table by turning crankshaft (K)
counterclockwise (ccw).
2. Place a piece of wood between the table and the
machine head. (DO NOT place the wood under the
collar (AJ).
3. Raise the table just enough to hold the block of wood
in place.
4. Loosen the two bolts (Z) on the machine head
counterclockwise (ccw) with a socket wrench.
5. Turning either crankshaft (H) clockwise (cw) will raise
the head.
6. STOP when the top of the machine head is flush with
the top of the column. DO NOT allow the column to
be below the top of the head.
7. Using the wrench, securely lock the two bolts (Z).
8. Now loosen the two setscrews on collar (AJ), slide it
up to the machine head, and tighten the setscrews.
9. Once the machine head is safely secured, remove the
block of wood.
10. To lower the head, reverse the above steps.
WARNING:
Failure to lock the collar can result in personal injury or
damage to the machine.
K
H
H
AJ
Z
AI
AI