7
7
OPERATION
•
Mount vise to work surface in desired location by securing all mounting flanges located on base. See
Dimension drawing at back of document. Use four 3/8
” diameter bolts, 2 inches longer than the bench top
thickness, flat washers and nuts (customer supplied).
•
Do not weld vise to any metal object. Make sure the bench top to which the vise is mounted is properly secured.
•
The vise is shipped with a protective coating. This coating should be removed before operation. Use
penetrating oil to remove protective coating.
•
Secure vise in the desire rotational position by hand tightening the lock handles. Do not use a pipe
extension or cheater bar. This may cause handles to bend and overstress locking bolt threads.
•
Open jaws of vise and place workpiece between jaws in desired position. Secure workpiece between jaws
by rotating leadscrew handle. Be sure workpiece is held securely in vise. Never use hammer, pipe extension or
cheater bar on leadscrew handle of vise.
MOUNTING DIMENSIONS
NOT TO SCALE!
