Baileigh BSV-24VS, Руководство оператора

Страница: 33 / 48

30
30
7. The selector knob pre-loads the left jaw
forcing the blade ends against one another.
8. Press and release the red weld button. DO
NOT hold it down. Electric current passes
through the butted blade ends. The left jaw
blade end is pushed into the molten puddle
and welded to the right blade end. Inspect
the weld carefully after removing from the
welder.
9. If you see what appears to be an excessive amount of flashing you can try backing off on the
weld force setting.
WARNING:
Sparks from the blade welding operation can be thrown in all
directions and can cause serious personal injury or fire. When using the blade
welder, always protect yourself and others from flying sparks. Keep fire extinguisher
equipment close by and DO NOT weld near flammables.
Good Weld Poor Weld
Weld centered
in gullet of blade Consistent tooth
spacing
Weld not centered
in gullet of blade
Unremoved tooth
embedded in weld
Inconsistent
tooth spacing
Incomplete weld
Blow-out
hole
figure 21
2 3 4 5
Check blade band misalignment
with a straight edge
figure 22
0 0
figure 20
“a” “b”