Baileigh Industrial WP-1800B, Руководство оператора

Страница: 15 / 32

13
13
GENERAL DESCRIPTION
•
You have made a practical choice in purchasing the WP-1800B Welding Positioner. It has
been carefully built of high quality materials and designed to give many years of efficient
service. The simplicity of design and minimum effort required to operate the machine
contributes towards meeting schedules and producing greater profits.
•
The WP-1800B Welding Positioner is a ruggedly designed machine with many features
standard. It can be easily rotated from horizontal to vertical by a simple handwheel
adjustment.
•
Control of the chuck is accomplished by use of a rugged DC gear motor with a specially
designed DC control. The control has a forward / reverse selection, max speed setting,
locking brake, and a variable foot control.
•
The electronics and motor are fully isolated for maximum protection from noise or shorts.
Current is carried from a large copper brush and transferred to the ground stud via braided
cable.
•
The chuck assembly utilizes a large thru hole for longer horizontal jobs and the cabinet has a
hole in the top for longer vertical work. The chuck is fully reversible for inside or outside
chucking.
ASSEMBLY AND SET UP
1. Remove the machine from the skid it was shipped on
2. Place the machine either on the floor or more commonly, a bench solid and sturdy enough to
support the machine and all work materials.
3. Read through the remainder of the manual and become familiar with normal operation.
4. Position the machine as desired following the installation guidelines.
5. Follow the electrical guidelines to connect the machine to a power supply.
WARNING:
For your own safety, DO NOT connect the machine to the
power source until the machine is completely assembled and you read and
understand the entire instruction manual.