Baileigh Industrial TN-600 Скачать руководство пользователя страница 11

Страница: 11 / 36

11.

Do not overreach

. Maintain proper footing and balance at all times.

DO NOT

reach over or

across a running machine.

12.

Stay alert

. Watch what you are doing and use common sense.

DO NOT

operate any tool or

machine when you are tired.

13.

Check for damaged parts

. Before using any tool or machine, carefully check any part that

appears damaged. Check for alignment and binding of moving parts that may affect proper
machine operation.

14.

Observe work area conditions. DO NOT

use machines or power tools in damp or wet

locations. Do not expose to rain. Keep work area well lighted.

DO NOT

use electrically

powered tools in the presence of flammable gases or liquids.

15.

Blade adjustments and maintenance

. Always keep blades sharp and properly adjusted for

optimum performance.

16.

Keep children away

. Children must never be allowed in the work area.

DO NOT

let them

handle machines, tools, or extension cords.

17.

Store idle equipment

. When not in use, tools must be stored in a dry location to inhibit rust.

Always lock up tools and keep them out of reach of children.

18.

DO NOT operate machine

if under the influence of alcohol or drugs. Read warning labels

on prescriptions. If there is any doubt,

DO NOT

operate the machine.

19. DO NOT touch live electrical components or parts.

20.

Turn off power

before checking, cleaning, or replacing any parts.

21.

Be sure all equipment

is properly installed and grounded according to national, state, and

local codes.

22.

Inspect power and control cables periodically

. Replace if damaged or bare wires are

exposed. Bare wiring can kill!

23.

DO NOT

bypass or defeat any safety interlock systems.

24. Keep visitors a safe distance from the work area.

Содержание TN-600





































Результаты поиска

Содержание TN-600

Отзывы:

Похожие инструкции для TN-600

Бренды по названию

Популярные бренды

Baileigh Industrial TN-600, Руководство оператора

Результаты поиска

Содержание TN-600

Отзывы:

Похожие инструкции для TN-600

Бренды по названию

Популярные бренды