Baileigh Industrial RDB-500, Руководство оператора

Страница: 35 / 52

32
32
LUBRICATION AND MAINTENANCE

Check daily for any unsafe conditions and fix immediately.

Check that all nuts and bolts are properly tightened.

On a weekly basis clean the machine and the area around it.

Lubricate threaded components and sliding devices.

Apply rust inhibitive lubricant to all non-painted surfaces.
Note : Proper maintenance can increase the life expectancy of your machine.

The fluid level in the power unit’s reservoir should be checked monthly. If the level is below
1/2 full, fill to the top with AW-46 hydraulic fluid. Hydraulic fluid and the filter should be
changed when the fil
ter gauge reads “Change Filter”.

Check periodically for leaks. If a leak is detected, consult Baileigh Industrial.

There are four grease zerks on the machine, at the main spindle pivots. Grease these zerks
every month with only two pumps from a standard grease gun.

Check for any loose or worn parts

If hoses or fittings are replaced, they must be rated for 4000psi (275 bars, 282 kg/cm).
WARNING:
Make sure the electrical disconnect is OFF before working on
the machine.
Maintenance should be performed on a regular basis by qualified personnel.
Always follow proper safety precautions when working on or around any machinery.