Baileigh Industrial DP-1850G, Руководство оператора

Страница: 32 / 52

29
29
Setting the Depth Stop
This machine has some built-in control stops that activate when either the bottom or top quill
travel limits are reached. Their functions include stop drilling, reverse tapping, or return the drill
bit to the start height.
1. Turn power off at the main disconnect.
2. Install the desired drill of tap.
3. Set up the work piece as if it was ready to be machines. This means fully clamped and
positioned under the tool for the first machining step.
4. Set the table height to minimize quill travel.
5. Set the tool depth to zero position by lowering a drill bit or tapping tool to the
surface of the piece part.
6. Hold in position.
7. Loosen the depth stop lock screw (A) to allow the
depth stop to be set.
8. Turn the depth stop adjustment screw (B) until the
indicator (C) is pointing to the line which matches
the desire depth drill or tapping depth.
9. Tighten the stop lock screw and the handle may be
released to allow the quill to fully retract.
10. The depth stop will now limit down travel of the quill
for manual, power feed, and tapping operations.
(Front depth scale is calibrated in both inches and
millimeters.)
C
A
B