Baileigh Industrial DP-1000G, Руководство оператора

Страница: 18 / 44

15
15
The Drill Head
The drill head attaches to the upper column. It
houses the motor, spindle, and speed controls.
Attached to it is the electrical enclosure, the
protective guard, the work light. The drill head
can be lowered, raised, and rotated on the
column as needed. Always unlock the head
clamp before changing position, and then lock the
head in the new position.
The Work Table
The sturdy work table can be positioned at
varying heights and rotated 180° in either
direction. It has T-
slots to allow the use of 1/2” or
M14 bolts. Below the work table are two lock
handle and a crankshaft. The crankshaft and lock
handle near the column control the up /down and
swing positions of the table and support arm. The
front lock handle under the table controls the
rotation of the table. Always unlock the table
before changing the height or rotating it. Then
lock the work table to secure in position.
The Machine Base
The machine base supports the entire machine
and should be secured to the work surface.