Baileigh Industrial DP-1000E, Руководство оператора

Страница: 24 / 36

22
22
Depth Stop
This drill press comes with a depth stop adjustment
for use when drilling.
1. Loosen the depth collar lock knob (A).
2. Secure the material you will be drilling onto the drill
press table.
3. With the desired bit installed, lower the spindle
until the tip of the bit just touches the material you
will be drilling. Hold the spindle in this position.
4. Turn the depth collar to the desired depth indicated
by the scale on the collar (B).
5. Secure the collar by tightening the lock knob (A).
6. Remove the material and test the depth stop by
measuring how far the spindle travels when the handles are rotated.
Work Table
1. Loosen the clamping bolt (A).
2. Use the crank handle (B) to raise or lower the table
to the desired height.
3. If needed, rotate the table on the column to allow
for the material to fit under the drilling point.
NOTICE: Use care to maintain load balance when
rotating the table. When applying downward
pressure during the drilling process, a poorly
secured work piece may come loose and fall or
rotate causing material or equipment damage.
B
A
A
B