Baileigh Industrial CS-315EU, Руководство оператора

Страница: 36 / 56

33
33
MACHINE ADJUSTMENTS
Adjustment of Saw Blade Head
If excessive axial play is found on the pivot hinge, it will be necessary to tighten the screws.
NOTE: Do not overtighten.
Adjusting the Mitering Lock Lever
1. The lock lever may require adjustment when the lever contacts
the machine base and fails to lock the machine head at required
angle. To re-adjust lever:
2. Loosen bolt (A).
3. Support the bushing (B) so that it does not drop.
4. Pivot lever (C) to unlock side (D) to allow more range of motion.
5. Re-tighten bolt (A).
Changing the Saw Blade
1. To change the saw blade:
2. Release and pivot the mobile guard (A) by removing the hex
socket screw (B).
3. Place a block of wood into the vise.
4. Lower the machine head to rest the saw blade on the block
of wood.
5. Using a hex wrench, remove the lock bolt (C) in a clockwise (cw) direction. (It has a left
handed thread).
6. Remove the blade (D) and blade washer (E) from the spindle.
7. Remove the blade washer from the saw blade (D).
8. Place washer (E) onto the replacement blade and follow above
procedure in reverse.
9. Check for proper blade rotation.
WARNING:
BEFORE PERFORMING THE FOLLOWING OPERATIONS,
THE ELECTRIC POWER SUPPLY AND THE POWER CABLE MUST BE COMPLETELY
DISCONNECTED.
C
A
B
D
B
A
C
E
D