Baier BSS 608H, Руководство пользователя

Страница: 25 / 320

– 8
 DANGER
The dust that has been collected should be
transported in dust-proof containers. No re-
filling is permitted. The waste containing as-
bestos is to be disposed off according to the
rules and regulations for waste disposal.
 DANGER
Only persons trained in waste disposal are
permitted to dispose off the dust collection
container.
 Release and remove the suction head.
Illustration
 Pull over the safety filter sack.
 Take off the protective film and close
the ventilation hole with a self-adhesive
tab.
Illustration
 Pull the safety filter sack towards the
rear.
 Seal the suction connection opening of
the safety filter bag tightly with closing
slides.
Illustration
 Securely close the safety filter bag with
the attached cable tie.
 Remove the safety filter bag.
 Wipe the inside of the container using a
damp cloth.
 Dispose of the safety filter bag in a dust-
tight bag according to the statutory pro-
visions.
Illustration
 Affix a new safety filter bag.
Illustration
 Pull the safety filter sack over the con-
tainer.
 Insert and lock the suction head.
Illustration
 Release and remove the suction head.
 Put the disposal bag over.
 Pull the opening of the disposal bag out
toward the back over the suction sup-
port.
 Seal the dust bag tightly with cable ties
under the suction connection opening
and the ventilation hole.
 Remove disposal bag.
 Wipe the inside of the container using a
damp cloth.
 Dispose of the disposal bag according
to the local provisions.
 Attach the new disposal bag.
 Pull disposal bag over the container.
 Insert and lock the suction head.
Illustration
 Allow device to cool down.
 Release the cooling air flaps with
screwdriver and swivel them out.
 Clean (vacuum, wash) or replace the
cooling air filter.
 Fold in the cooling air flaps and snap
them in place.
 Release and remove the suction head.
 Clean the electrodes with a brush.
 Insert and lock the suction head.

DANGER
First pull out the plug from the mains before
carrying out any tasks on the machine.
Note: In case of a failure (e.g. filter break-
age) the appliance must be turned off im-
mediately. The failure must be remedied
before the appliance is put into operation
again.
 Check the receptacle and the fuse of
the power supply.
 Check the power cable, the power plug,
the electrodes and the receptacle of the
device.
 Turn on the appliance.
 Empty the container.
 Insert both flat fold filters.
Replacing the safety filter sack
Replace the disposal bag
Clean/replace the cooling air filter
Cleaning the electrodes
Troubleshooting
Suction turbine does not run
Suction turbine turns off
25 EN