15
Insert Tools and Accessories
• Star-type wheel dresser set
(SF 80 star-type wheel dresser set incl. guard plate)
(ID. No. 60616)
• Guard plate for star-type wheel dresser and
carbide cutter with indexable inserts
(ID. No. 57463)
• Replacement star-type wheels
(1 set contains 16 spare star-type wheels)
for star-type wheel dresser
(ID. No. 57984)
(16 replacement star-type wheels required per star-type wheel dresser)
•
Replacement
washers
(ID
No.
21071)
(Washers are required to adjust the cutting depth.)
• BAIER BSS 506 special dust extractor
(ID. No. 73585)
Before Starting Work
Note and follow the following points before each use to ensure safe working with the
façade cutter:
• Read through all safety instructions and warnings in this instruction manual.
• Check whether the voltage on the rating plate is identical with the mains voltage.
• Before each use, check the machine, connection cable, plug and tight fit of the cut-
ters or grinding discs.
• Use only BAIER cutters and BAIER grinding discs, to ensure adequate safety.
• Use only the insert tools recommended by Maschinenfabrik OTTO BAIER GmbH for
the respective use (see table on page 14).
• Depending on the insert tool, attach the appropriate guard plate (see page 19) and
set the correct cutting depth (see page 18).
• Wear protective clothing such as hard hat, face protection or safety goggles, half-
face filter mask, hearing protection, safety gloves, slip-resistant safety footwear and
if necessary an apron.
• The façade cutter may only be used, either if a dust extractor is connected (see also
next point) or if the socket for connection of the dust extractor hose is closed off with
a cap.
• If materials that produce harmful dusts are cut (e.g. quartz sand, lead-containing
paint pigments, etc.), a suitable dust extractor (e.g. BAIER BSS 506 special dust ex-
tractor) must be connected to the façade cutter.
•
Please note!
We can only guarantee the machine's full performance if it is used with the BAIER
BSS 506 dust extractor.
•
Danger!
Risk of fire if cable drums used.
►
If cable drums are used, ensure the cable is completely unwound. The rolled up
cable can heat up and start to burn.
