Baier BDB 819, Перевод оригинального руководства пользователя

Страница: 35 / 72

| 35 |
Anti-vibration safety glove
At a release value A (8) for arm-hand
vibrations of over 2.5 m/s
2
, the wearing
of anti-vibration safety gloves is
recommended.
Non-slip safety footwear
Dust mask, half-face filter mask or
face mask respirator
Inhaling fine mineral dust can cause
health damage. We recommend
wearing a face mask respirator with
filter class P2 or P3 (to EN 149:2001).
Wet drilling: Working with wet
diamond core drill bits is a grinding
process, during which extremely fine
dust is produced, which is bound by
the added water. If the used water with
the bound dust is not collected, the
bound dust is re-released after drying.
When drilling materials containing
quartz, the risk of silicosis is very high;
therefore, the machine may therefore
only be used in conjunction with the
BAIER BDB 802 centring guide with
suction holder.
•
Ensure other people keep a safe distance
from your work area. Any person entering
the work area must be wearing personal
protective equipment.
Broken pieces of the workpiece or broken insert
tools can fly off and cause injuries, even outside
the immediate work area.
•
Hold the tool at the insulated gripping
surfaces only when carrying out work during
which the insert tool can hit concealed
electricity cables or the tool's own mains
power lead.
Contact with a live conductor can also energise
metal parts of the tool and cause an electric
shock.
•
Keep the mains power lead away from
rotating insert tools.
If you lose control of the tool, the mains power
lead can be cut or caught and your hand or arm
can be pulled into the rotating insert tool.
•
Never put down the power tool until the
insert tool has come to a complete standstill.
The rotating insert tool can come into contact
with the surface on which the power tool is
placed, which could cause you to lose control of
the power tool.
•
Do not leave the power tool running while
you are carrying it.
Your clothing can get caught by inadvertent
contact with the rotating insert tool and the
insert tool can drill into your body.
•
If the machine is switched on, do not direct
insert tools towards your own or other
people's bodies. Do not touch or take hold
of the tools.
•
Always wear hearing protection during
hammer drilling.
Exposure to noise can cause a loss of hearing.
•
Always use the additional handle supplied
with the tool.
Loss of control of the machine can result in
injuries.
•
Do not use this tool for overhead drilling
with water supply.
The ingress of water into the power tool
increases the risk of an electric shock.
NOTE
The above safety instruction is only required for
power tools that cannot be used for overhead
drilling work.
•
Always use the liquid collection device
specified in the instruction manual for
overhead drilling work. Ensure that no water
penetrates the tool.
The ingress of water into the power tool
increases the risk of an electric shock.
NOTE
The above safety instruction is only required for
power tools that can be used for overhead drilling
work.