Baier Elektrowerkzeuge BDB 819, Перевод оригинального руководства пользователя, Страница: 32 / 112

| 32 |
EN
d) ore power tools out of the reach of children
when not in use. Do not allow people to use
the power tool if they are not familiar with
it or if they have not read this instruction
manual.
Power tools are dangerous if they are used by
inexperienced people.
e) Maintain power tools with care. Check
whether moving parts are in proper working
order and do not jam, whether parts are
broken or damaged in such a way that they
impair the function of the power tool. Have
damaged parts repaired before using the
tool.
Many accidents are caused by poorly serviced
and maintained power tools.
f) Keep cutting tools sharp and clean at all
times.
Carefully maintained cutting tools with sharp
cutting edges jam less easily and are easier to
control.
g) Use the power tool, insert tools, etc. in
accordance with this instruction manual.
Take into consideration the working
conditions and the work to be carried out.
Use of power tools for other than the intended
applications can lead to dangerous situations.
h) Keep the handles and gripping surfaces dry,
clean and free from oil and grease.
Slippery handles and gripping surfaces prevent
safe operation and control of the power tool in
unforeseen situations.
2.5 Service
a) Have your power tool repaired by qualified
personnel only and use original spare parts
only.
This will ensure that the safety of the power tool
is maintained.
2.6 Safety instructions for wet
diamond drills
2.6.1 Operating personnel
requirements
•
People below the age of 18 may not use the
machine.
•
The operating personnel must be familiar
with the content of this instruction manual.
2.6.2 Safety instructions for all work
•
Wear hearing protection when hammer
drilling / diamond drilling.
Exposure to noise can cause loss of hearing.
•
Use the additional handle(s).
Loss of control can result in injuries.
•
Support the power tool properly before
using.
This power tool produces a large torque. If the
power tool is not properly supported during use,
the use can loose control of it and injuries can
occur.
2.6.3 Workplace safety
•
Secure the work area also behind openings
and cutouts.
Unsecured work areas can endanger you and
other people.
•
Watch out for open and concealed electricity
cables, and water and gas pipes. Use
suitable detectors to find concealed utility
pipes and cables, or contact the local utility
company for advice.
Contact with electricity cables can cause fires
and an electric shock. Damage to a gas pipe
can cause an explosion. Penetrating a water
pipe causes damage to property or could cause
an electric shock.
•
Do not use the power tool near flammable
materials.
Sparks could ignite these materials.
•
Avoid causing situations where other people
can stumble or trip.
Tripping over cables can cause serious injuries.
•
Secure the workpiece.
A workpiece securely held in clamping devices
or a vice is more safely held than in the hand.
•
Avoid dust accumulation in the workplace.
Dusts can easily ignite.
•
Ensure adequate ventilation in closed
rooms.
Risk due to dust and impaired vision.
•
When carrying out drilling work that requires
the use of water, route the water away from
the work area or use a liquid collection
device.
Such precautions keep the work area dry and
reduce the risk of an electric shock.