19
4. Attentions
FAQ
4.1
1.
How to choose the position of holding pole in the roof
1) Not near the edge.
2) The position of non-bearing beam cannot be selected.
3) Do not choose the side close to the barrier, you need to choose the most
open position.
2.
The coverage of eNB signal is not ideal after opening
1) Check if the power is full in the base station configuration.
2) Check whether the equipment has standing wave alarm. If there is any
alarm, please handle it in time.
3) Check whether the RF frequency band of the equipment is consistent with
that of the antenna.
4) Check whether the dip angle planning of the base station is reasonable.
5) Whether there is blocking in antenna coverage direct vision.
Common Installation Errors
4.2
The holding pole lightning rod is not led to
the ground bar
Disordered wiring of distribution box
