Baicells Neutrino430, Руководство по установке

Страница: 24 / 28

24
Figure 3-18: Quick Setting
3.5.6 Configure Carrier Setting
Reference: Carrier Aggregation & Dual Carrier (Split Mode) Configuration Guide
The Carrier Setting menu is used only in the two- carrier Neutrino-430 eNB (Figure 3-19). You
can set the eNB to run as a single carrier, as two combined carriers using Carrier Aggregation
(CA), or as two independent carriers using Dual Carrier (DC)/split mode, depending on which
licenses you have purchased. Single carrier (no CA) means only Cell 1 will operate and use only
2 RF ports instead of 4. Operators may need to use this mode if they have limited spectrum or
are planning to change to CA or DC mode at a later time when more capacity is needed for the
coverage area.
At the
Carrier Mode field, if you select Dual Carrier , the Carrier Aggregation check box is
automatically checked for the two carriers to operate in CA mode. If you want the eNB to
operate in DC/split mode, uncheck the
Carrier Aggregation Enabled check box.
Whenever you change the carrier setting, you must
reboot
the eNB for the change to take
effect.