Baicells Neutrino430, Руководство по установке

Страница: 23 / 28

23
Table 3-4: Management Server
Field Name Description
SSL Enable/Disable Secure Socket Layer (SSL) using ON/OFF
Management Server Enter the management server IP address and port number
CloudKey
Operators using the Baicells CloudCore are provided a unique CloudKey
identifier that may be used when configuring CPEs and eNBs. If entered in
this field, when the device is powered on it will immediately associate to
the operator's OMC account. You can find your CloudKey ID when you log
in to the CloudCore. It is displayed in the top bar.
SNMP Enabled= OFF/ON
Com2sec
Configuration Option available when SNMP option is enabled:
•
Secname
• Source
•
Community
Trap Configuration Option available when SNMP option is enabled:
•
Community
• Host
3.5.5 Configure Quick Settings
Under the BTS Info > Quick Setting window (Figure 3-18) are several important fields you must
configure and/or verify. First, if the operator is using the Baicells CloudCore EPC, you must enter
a fixed PLMN and MME IP address:
•
PLMN = 314030
•
MME IP = 10.3.0.9 and 10.5.0.9
Do not change these settings except when connecting to a Local (private network) EPC or
different vendor's Evolved Packet Core (EPC). Second, you must enter the operator's planned
settings for Band, Bandwidth, EARFCN, Cell ID, PCI, TAC, etc. Some
Quick Setting fields such as
Duplex Mode and Frequency will auto-fill based on the eNB hardware model. Make sure the
Cloud EPC field is set to ON when using the Baicells CloudCore. If you are testing the eNB in a
lab environment, turn the power down as low as it will go under the Power Modify field.
NOTE 1: If planning to use CBRS SAS, the SAS vendor will determine some of these
parameters. Refer to the
SAS Deployment Guid e for more information. Legacy Gen 1
CPEs do not support SAS.
NOTE 2
: Neutrino-430 does not support SFA = 0.
For a description of all the Quick Setting fields, refer to the Baicells CPE Configuration Guide .