LTE TDD Base Station Installation Guide
7
2. Installation Preparation
Support Materials
2.1
Prepare the following support materials accordingly, as given in Table 2-1.
Table 2-1 Support Materials for Installing Base Station
Item
Description
Power cable
< AWG16 e.g. AWG14
Shorter than 100m (330 feet)
Antenna RF cable
50 ohm feeder
Optical fiber
Single mode optical fiber
Ethernet cable
Outdoor CAT6
Shorter than 100m (330 feet)
Antenna
Omnidirectional, or directional antenna
Ground cable
16mm² yellow-green wire
Installation Tools
2.2
The following tools are needed during the installation.
Level bar
Marking pen
Knife
Vise
Wrench
Percussion drill and
some drill heads
hammer
Cross screw
driver
Cable vice
Tape measure
5mm L-shape Allen
wrench
T7 screwdriver
head
Ladder
