18
Select one of the following options:
•
Full Band
(default)
–
All channels in the band.
−
The CPE will routinely scan all channels in the band and all EARFCNs, increasing the time it
takes to connect compared to the other modes. The band is dependent on the CPE model.
•
Dedicated EARFCN
– Specific EARFCNs or frequencies. (Figure 27)
−
The CPE will scan the dedicated EARFCN or frequency list first when it is powered on.
−
If the CPE cannot connect to the LTE network after scanning the list, it will scan other
supported bands and frequencies. You can add up to 10 EARFCNs or frequencies.
•
Cell Lock
–
A combination of PCI + EARFCN or frequency. (Figure 28)
−
The CPE is limited to scanning a specific list of eNBs based on both their Physical Cell
Identifier (PCI) and EARFCN or frequency. The CPE will scan the list of eNBs with the
EARFCN and PCI combination. Using this mode can accelerate network access time.
•
PCI Lock
–
Specific PCIs only. Locks the CPE to a designated PCI or PCI range. (Figure 29)
After selecting an option, enter the required information and select
ADD
.
Figure 27: Dedicated EARFCN
Figure 28: Cell Lock
