Nova-243 Outdoor LTE TDD Base Station Installation Guide
3
The Nova-243 interfaces are described in Table 1-1.
Table 1-1 Nova-243
Interface Description
Interface Name
Description
ETH0
RJ-45 electronic interface, support 10M/100M/1000M
self-adaptation, external transmission network.
ETH1
RJ-45 electric interface, used for debugging.
SNF
External Sniffer, Type N interface
ANT0
External antenna 1,Type N interface
ANT1
External antenna 2,Type N interface
GPS
External GPS antenna, Type N interface
PWR
Power interface: -48V DC (-36V~-60V)
The Nova-243 interface indicators are described in Table 1-2.
Table 1-2 Nova-243
Interface Indicators
Identity
Color
Status
Description
RUN
Green
Fast flash: 0.125s
on,0.125s off
The board is loading.
Slow flash: 1s on,1s off The board is normal.
OFF
No power input or board fault
ALM
Red
Steady On
Hardware alarm, e.g. VSWR alarm
OFF
No alarm
ACT
Green
Steady On
The cell has been activated.
OFF
The cell has not been activated.
VSWR
Red
OFF
The standing wave is normal.
Steady On
The standing wave is large than
normal.
Technical Specification
1.4
1.4.1 Hardware Specification
Item
Description
LTE Mode
LTE TDD
LTE Bands
BRU3501: 3650MHz~3700MHz for FCC application
3550MHz~3700MHz for IC application
BRU3508: 2300MHz~2370MHz
BRU3509: 2300MHz~2320MHz
