BBT60A
*Return Feature:
Before the test is started, the user can always return to the previous setting page by pressing
<<ENTER>> for 2 seconds.
SURFACE CHARGE NOTICE
The battery will hold a surface charge if the engine has been running or after the battery has been charged. The
tester may prompt you to remove the surface charge.
A. Follow the instructions indicating when to turn the headlights on and off or apply a load into the battery.
IN VEHICLE:
OUT OF VEHICLE:
B. The tester will resume testing after it detects that the surface charge
is removed.
EN
BATTERY TYPE:
AGM FLAT PLATE
SELECT RATING:
CCA/SAE
SELECT CAPACITY:
560CCA/SAE
ABOVE 32°F/0°C?
YES/NO
TURN HEADLIGHTS
ON FOR 15 SECS
TESTING
TESTING
3. Press the / key to select the battery type:
4. Press «ENTER» to confirm choice.
5. Press the / key to select the battery rating:
CCA/SAE, EN, JIS, DIN, IEC, & CA/MCA.
6. Press «ENTER» to confirm choice.
7. Press the / key to input the battery capacity.
CCA/SAE: 40~2000
EN: 40~1885
DIN: 25~1120
IEC: 30~1320
JIS: By Battery Type No.
CA/MCA: 50~2400
8. Press the / key to confirm temperature.
9. Press <<Enter>> to begin the test.
SURFACE CHARGE
IN VEHICLE? YES
SURFACE CHARGE
IN VEHICLE? NO
Содержание BBT60A
Страница 1: ...1 1 Original Instructions 12V BATTERY TESTER BBT60A BBT60A START STOP ENTER 2s 12V...
Страница 104: ...BBT60A 12 Volt 12 24 Volt 0 C 32 F 50 C 122 F www P65Warnings ca gov 1 2 3 1 2 3 4 5 6 7 1 2 3 4 5 CHECK CABLE 1 2 EL...
Страница 125: ......
Страница 126: ...SNA EUROPE Group Headquarter All e Rosa Luxembourg 95610 Eragny sur Oise France...