Bagela
Bagela
Bagela
Bagela
asphalt recycler
asphalt recycler
asphalt recycler
asphalt recycler
BA 7000F / BA 10000
BA 7000F / BA 10000
BA 7000F / BA 10000
BA 7000F / BA 10000
4
3 General
Description
The asphalt recyclers BA 7000F and BA 10000 may be used for reprocessing cold asphalt
mix (fines, milling asphalt) and broken-up asphalt slabs of sizes up to 300 mm by 400 mm by
100 mm (BA 10000: 400x500x100). Thicker slabs should be broken down to lumps of 300
mm side lengths.
Do not fill more than 1100 kg into the tumbler of the BA 7000F (BA 10000: 2000 kg), which
corresponds to 80 bar on the hydraulic oil pressure gauge.
Transport:
-
Adjust the drawbar so that the recycler is in horizontal position and the permitted supporting
load will not be exceeded.
4
Procedure for reprocessing broken-up asphalt slabs
4.1
Set-up of recycler for stationary operation
-
Before uncoupling from the towing vehicle, secure the recycler against accidental
movement by chocks and applying the hand brake.
-
Let the rear props down to the ground and secure them with pins.
-
With the aid of the spirit level at the chassis, level out the recycler into horizontal position by
turning down the forward propping jacks.
-
Do not place the recycler below overhead power lines, parts of buildings or trees to avoid
fires.
-
Top up fuel oil for the burner and diesel for the engine.
-
Check the engine oil level and top up if required.
Attention:
Use clean fuel only. At temperatures below zero add a suitable fuel flow
improver. Never start the engine and the burner while the recycler is being
moved.
