Hardware Setup
After completing device driver setup for your Hi-Speed USB Card Reader and restarting the system, refer
to following instructions to install the reader.
1. Connect USB cable from your reader unit to available USB port of your computer.
2. Your computer will automatically recognize the Hi-Speed USB Card Reader and register new devices.
3. Two or four
Removable Disk
icons representing the sockets will be added onto
My Computer
.
4. The installation of your Hi-Speed USB Card Reader is now complete.
11
Using the Reader
Please refer to following instructions to use the reader.
1. Insert your storage card.
2. Open
My Computer
or
File Explorer
.
3. Double-click on the proper
Removable Disk
icon.
4. Access images and files on your storage cards just a way you open, copy, move, or delete images and
files on your hard disk drive.
WARNING!
Do not insert or extract storage cards while the red LED is flashing.
Uninstall Software
Should you feel necessary to remove the installed?
Software and driver files of your Hi-Speed USB Card
Reader, please refer to following ins tructions.
1. Unplug the reader from USB port.
2. Click
Start
, and then click
Programs
.
3. on the pop-up menu, click on
Uninstall USB Reader
.
4. A dialog box appears asking for your confirmation. Click
yes
to continue.
5. Software and driver files of your Hi-Speed USB Card Reader will be removed automatically.
After removing software and driver files, you'll need to perform
Software Setup
and
Hardware Setup
before using your Hi-Speed USB Card Reader again.
Setup for Mac OS
Software Setup
Install device driver according to following instructions:
1. Insert the
Setup Disc
into the CD-ROM drive of your Macintosh computer.
2. Double-click the
CD-ROM
icon on the desktop, and then run the
USB Reader Installer
application, the
content of
Read Me
appears. Click on
Continue
to proceed. You can also find this file in the Setup Disc
if you want to view it later on.
3. The
Installer Dialog
appears. Select
USB Reader Installer
in the pop-up menu and then click on the
Install
button to install the device driver.
4. A
warning dialog
will appear on the screen telling you that you should quit all running applications
before installation.
5. Click
Continue
button to start copying files. Click
Cancel
button if you want to quit other running
applications first.
6. After files copying are completed, the
Restart dialog
appears. Click
Restart
button to restart the system
or
click
Quit
button to exit the installer.
