9
USER SETTING
CONSUMER MANUAL –
DP C18.CAN
7 USER SETTING
7.1
“SETTING” interface
After the HMI powered on, briefly
press(<0.5S)
for two times to enter into
the “SETTING”. Briefly press (<0.5S)
or
to select and then briefly press (<0.5S)
to
confirm and enter into the option.
Select “EXIT” and briefly press(<0.5S)
to
exit, or briefly press (<0.5S)
twice
in any interface to exit, then the set dates
are saved.
If there is no
t
any operation within 20s, the
set interface will be exited and no
data is
saved (as follow
s)
.
7.2
“Display setting” interface
In “SETTING” interface, briefly press (<0.5S)
or to select “Display setting” and then
briefly press (<0.5S)
to confirm and enter
into “Display setting”. There are thirteen
options in this interface.
7.2.1 “Unit” --- set unit for km/mile
Briefly press (<0.5S)
or to select
“Unit”, and then briefly press (<0.5S)
to enter into the interface. Select “Metric”/
“Imperial”, and then briefly press (<0.5S)
to save and exit back to “Unit” interface,
then briefly press (<0.5S)
twice
to
exit or you can also select “BACK”
→
“EXIT”
to exit back to the main interface.
FiSHAW 202
3
