5
BF-UM-C-BT F150-D-EN May 2023
USER MANU
AL FOR BA
TTER
Y
8.2 OPERATION
8.2.1 Installing the battery
For correct insertion, the battery must be
connected, ensuring all pins are correctly
connected to the battery holder. When pushing
the battery into position. Make sure that the
battery has clicked into the locking mechanism
before you set off.
1. Put the battery on the down support.
2. Push the battery into the battery holder,
when hears a ‘click’ sound, that means
battery is locked.
8.2.2 Removing the battery
1. Turn the key on the battery holder to open
lock.
2. Move out and take out the battery from
the holder.
8.2.3 Charging the battery
Use only the original battery charger supplied to
you, as there is a risk of fire or explosion if the
incorrect charger is used.
You can charge your battery when mounted on
the bike or when it is removed.
Lithium-ion batteries are not subject to any
memory effect. You can recharge your battery
at any time, even after short journeys.
Charge the battery at temperatures between 0°C
and 45°C (ideally at room temperature approx.
20 °C). Give your battery enough time to reach
this temperature before charging.
Before charging, read the instructions on the
charger.
1. First plug the connector of the charging ca-
ble into the charging socket in the battery,
then connect the charger into a wall socket.
2. As soon as the charger is connected to the
power supply, a red LED will light up.
red
3. When charging is complete, the LED
changes from red to green.
green
The charging time depends on several factors. It
can vary greatly depending on the temperature,
age, use and capacity of the battery. For information on
the charging time of your battery, see
"SPECIFICA-
TION".
When the battery is fully charged, the charging
process stops automatically. Unplug the connec-
tor from the battery and then removed from the
mains.
