6
BF-UM-C-DP E08-EN November 2019
7.7 ERROR CODE DEFINITION
The display can show the errors of a pedelec. When the fault is detected, the error
code will be displayed through the level indicator in flashing. Level 1 indicates the
tens digit of an error code while level 2 indicates the units digit. For example:
1) Error code 04
The LED indicator for level 1 does not light, and level 2 flickers for 4 times. After 1 second pause, repeat the pattern.
2) Error code 11
The level 1 flickers one time, then level 2 flickers one time. After 1 second pause, repeat the pattern.
Note:
Please read carefully the description of the error code. When the error code appears, please first restart the
system. If the problem is not eliminated, please contact your dealer or technical personnel.
Error
Declaration
Troubleshooting
04
The throttle is not back in its correct
position.
Check the throttle can adjust back into its
correct position, if the situation does not
improve, please change to a new throttle.(only
with this function)
05
The throttle has fault.
1. Check the connector of throttle whether
they are correctly connected.
2. Disconnect the throttle, If the problem still
occurs, please contact your retailer.
(only with this function)
07
Overvoltage protection
1. Remove the battery.
2. Re-Insert the battery.
3. If the problem persists, please contact your
retailer.
08
Error with the hall sensor signal
inside the motor
Please contact your retailer.
09
Error with the Engine phase’s
Please contact your retailer.
10
The temperature inside the engine
has reached its maximum protection
value
1. Turn off the system and allow the Pedelec
to cool down.
2. If the problem persists, please contact your
retailer.
11
The temperature sensor inside the
motor has an error
Please contact your retailer.
12
Error with the current sensor in the
controller
Please contact your retailer.
Level 1
Level 2
