background image

After the display is turned on, press the

and       button at the same time (>2 s), to

access the “PROPERTIES” menu. By pressing

the       or       button (<0.5 s), you can select:

“Setting”, “Information” or “Exit”. Then press 

the         button (<0.5 s) to access your 

selected option.

Selecting "Exit" in the “PROPERTIES” menu 

will return you to the main screen and your 

new settings will be saved. 

If no button is pressed within 20 seconds,

the display will automatically return to the

main screen and no data will be saved.

Pressing the       and      buttons at the same 

time (>2 s) returns to the main screen.

Selecting “Back” in the “Setting” or “Informa-

tion” menu returns to the “PROPERTIES” 

menu.

Press the       or       button (<0.5 s) to select 

“Unit” in the “Setting” menu, and then 

press the         button (<0.5 s) to access it. 

Then with the       or       button choose 

“Metric” (kilometers) or “Imperial” (miles) 

and press the         button (<0.5 s) to save 

and return to the “Setting” menu.  

8

1.8  PROPERTIES

 

1.8.1   “Setting” 

Press the   or   button (<0.5 s) to select 
"Setting", and then briefly press the 

 

button (<0.5S) to access the following 
options:

1.8.1.1  “Trip Reset”  Reset mileage

Press the       or       button (<0.5 s) to select 

“Trip Reset” in the “Setting” menu, and 

then press the         button (<0.5 s) to access 

it. Then with the       or       button choose 

“YES” or “NO” and press the         button 

(<0.5 s) to save and return to the “Setting” 

menu.  

1.8.1.2  “Unit” Selection (km/miles)

Содержание DP C230.CAN

















Отзывы: