BAFANG DP C230.CAN, Руководство пользователя

Страница: 12 / 16

12
1.9 ERROR CODE DEFINITIONS
Error Declaration Troubleshooting
07 Overvoltage protection
1. Remove and re-insert the battery to see if this
resolves the problem.
2. Use the BESST tool to update the controller.
3. If 1 & 2 fail, change the battery.
08
Error with the hall sensor signal
inside the motor
1. Check all connectors from the motor are correctly
connected.
2. If the problem still occurs, change the
motor.
09 Error with the motor phases Change the motor.
10
The temperature inside the
motor has reached its
maximum protection value
1. T ebike to cool
down.
2. If the problem persists, change the motor.
11
The temperature sensor inside
the motor has an error
Change the motor.
12
Error with the current sensor in
the controller
Change the controller or contact your supplier.
Note: Please read the description of the error code carefully. If you see an error code, restart the system first. If
the problem is not resolved, contact your dealer.
The BESST tool is Bafang's diagnostic device that a trained ebike mechanic can use to read and repair the
electrical system. If your ebike mechanic doesn't have a BESST tool, ask them to contact Bafang or FLIT.
If an error is detected, the display will show an error code that can be used to identify the problem that has
occurred in your electrical system.