BAFANG DP C18.UART, Руководство пользователя

Страница: 14 / 20

14 DISPLAY MANUAL DP C18.UART
This moment, briefly press (<0.5S) or to switch numbers “0-9”, and then briefly press (<0.5S)
to confirm input number. After input, it show input password again in the interface. Repeat the
above step to input password again. If the password is same with the previous time, the system will
prompt it is successful to set password, otherwise it need to repeat the first step to input the new
password and then re-confirm.
After setting the passwrod, the interface exit back automatically to original interface within two
seconds. Briefly press
for two times (interval time is less than 0.5S) to exit back to main interface
or select “BACK”
→
“EXIT” to exit back to main interface.
Change password:
After setting the password, the interface “Password” will add option “Reset Password”. Briefly press
(<0.5S)
or to select “Reset Password”, and then briefly press (<0.5S) . This time it prompt
input current password in the interface. If inputing worng password for ten tiems, the display will
turn off automatically. When inputing right password, it prompt input new passwrod in the interface.
The following step is same with starting password. After changing the password, it will exit auto-
matically back to the original interface within two seconds.
Briefly press for two times (interval time is less than 0.5S) to exit back to the main interface or
select “BACK”
→
“EXIT” to exit back to main interface.