BAFANG DP C01.RS2 32.7, Руководство пользователя

Страница: 34 / 53

34
Danger

Do not deform, modify, disassemble or apply solder directly to the battery. Doing so may
cause leakage, overheating, bursting, or ignition of the battery.

Do not leave the battery near sources of heat such as heaters. Do not heat the battery or
throw it into a fire. Doing so may cause bursting or ignition of the battery.

Do not subject the battery to strong shocks or throw it. If this is not observed, overheating,
bursting, or fire may occur.

Do not place the battery into fresh water or sea water, and do not allow the battery
terminals to get wet. Doing so may cause overheating, bursting, or ignition of the battery.

Use the specified charger and observe the specified charging conditions when charging the
battery. Not doing so may cause overheating, bursting, or ignition of the battery.

Do not short-circuit the discharge port with a metal part, or else it may cause overheating,
bursting, or ignition of the battery

Do not leave the battery in a place exposed to direct sunlight, inside a vehicle on a hot day,
or other hot places. Doing so may result in battery leakage.

If any leaked fluid gets on your skin or clothes, wash it off immediately with clean water.
The leaked fluid may damage your skin.

Store the battery in a safe place out of the reach of infants and pets.