Badland ZXR 5000 Скачать руководство пользователя страница 5

Page 5

For technical questions, please call 1-888-866-5797.

Item 56326 

        

SAFE

ty

O

PERA

ti

O

n

M

A

int

En

A

n

CE

SE

tu

P

17. Keep children and bystanders away while operating.  

Distractions can cause you to lose control.

18. Stay alert, watch what you are doing and 

use common sense when operating.  Do not 

use a winch while you are tired or under the 

influence of drugs, alcohol or medication.  A 

moment of inattention while operating winches 

may result in serious personal injury.

19. Do not overreach.  Keep proper footing and 

balance at all times.  This enables better control 

of the winch in unexpected situations.

20. Hook onto the object using a pulling point, 

tow strap or chain. Do not wrap the wire rope 

around the object and hook onto the wire rope 

itself. This can cause damage to the object 

being pulled, and kink or fray the wire rope.

21. 

Do not use a Recovery Strap while 

winching.

  They are designed to stretch 

and can suddenly whip back towards the 

operator during a winching operation.

22. Secure load after moving.   

NO LOCKING MECHANISM.

23. Keep at least 5 full turns of wire rope on 

drum.  The wire rope’s connection to the 

drum is not intended to sustain a load, 

without the added support from the friction 

of at least 5 full turns of wire rope.

24. Wrap wire rope under 500 lb. tension before use.  

Otherwise, wire rope may bind during operation.

25. Keep clear of wire rope, hook, and load while 

winching.  Do not step over wire rope.   

Do not push sideways against wire rope 

under tension; wire rope might break under 

this load and recoil back, striking the 

person pushing against it or a bystander.

26. If wire rope begins to get entangled, stop winch 

immediately and release wire rope using switch.

27. Only winch with the winching vehicle′s 

transmission in neutral.  Winching with a vehicle′s 

transmission in gear or park may damage 

the transmission.  A vehicle′s transmission is 

not designed to handle that type of load.

28. Do not operate the winch at extreme angles.  

Do not exceed the angles shown in Figure B for 

a roller fairlead.  For a hawse fairlead, the angle 

should be as close to straight as possible.

15°

15°

45°

45°

Figure B:  Roller Fairlead Maximum Winching Angles

29. If the object to be pulled must be pulled at an 

angle in relation to the winch, use a snatch 

block (sold separately) and an anchor point 

directly in front of the winch, as shown in 

Figure C, to keep the Wire Rope pull straight.

Figure C:  Snatch Block

30. Broken strands of wire rope will be sharp.  

Wear heavy-duty work gloves when handling 

the wire rope.  Do not slide wire rope 

through hands, even with gloves on.

31. Winch motor will be 

hot during and after use.  Keep clear.

32. Do not power the hook all the way 

into the fairlead or winch.

33. People with pacemakers should consult their 

physician(s) before use.  Electromagnetic fields in 

close proximity to heart pacemaker could cause 

pacemaker interference or pacemaker failure.

Содержание ZXR 5000

















Отзывы: