Page 12
For technical questions, please call 1-800-444-3353.
ATV Winch
Installation and Setup
Read the ENTIRE IPORTANT SAFETY
INFORATION section at the beginning
of this manual including all text
under subheadings therein before
set up or use of this product.
ounting the Winch
1. The plate must be rated to at least the winch’s capacity.
2. Align the winch perpendicular to center line
of the vehicle at the desired location, and
mark the locations of the winch base holes.
Compare the dimensions of the marked holes to
the section of Figure D that matches your winch.
2*Ø0.33 in. / 8.5mm
3.15 in. / 80mm
3.94 in. / 100mm
2 in. /
51mm
8.31 in. / 211mm
11.25 in. / 286mm
odel 68146
2.83 in.
/ 72mm
4.13 in. / 105mm
1.25 in. / 32mm
odel 68145
2 in. / 51mm
2.83 in.
/ 72mm
4.49 in. / 1
14mm
4*Ø8mm
(threaded)
4.33 in. / 1
10mm
3 in. / 76mm
4.88 in. / 124mm
6.3 in. / 160mm
13.35 in. / 339mm
odel 68144
2 in. / 51mm
4.72 in. / 120mm
15.55 in. / 395mm
4.72 in. / 120mm
6.61 in. / 168mm
5.31 in. / 135mm
4.61 in. / 1
17mm
3 in. / 76mm
4*Ø8.5mm
FIGURE D — WINCH DIENSIONS
REV 11e
Brought to You by www.snapwhole.com
