background image

04

The battery is not fully charged at the factory, please charge before initial use.
After purchase or extended storage (more than two months), the battery will not charge
to its full capacity on the initial charge cycle. After two or three charge/discharge cycles, 
the battery will charge to its full capacity.

Notice: After fully charging the battery, remove from the charger. Do not charge it again until after 
use or extended storage (more than two months). Over-charging the battery can damage the 
battery and/or shorten the battery life.

Note:
 • The battery must be charged between 40˚F to 104˚F. It can not be fully charged outside of 
    this temperature range. Please prepare a spare battery for extended cool weather use. 
    The depleted batteries may be charged once they are within the stated temperature range.
 • Keep the battery contacts clean to ensure proper charging and use.
 • Please turn off the radio before charging.
 • Do not charge the battery if the battery or radio is wet.
 • Please replace the battery if it no longer charges to full capacity.

Battery Type

Please use the Badger Werx supplied charger(s) and batteries. Using non-approved 
batteries or chargers may result in fire, personal injury and/or damage to property.

05

Battery Safety Tips

• Do Not Dissasemble
• Do Not Dispose Of In Fire
• Do Not Charge In Hazardous Locations
• Do Not Short-Circuit Terminals 

 • A fully charged battery can be stored safely for up to two months.
 • For extended storage, charge/discharge battery to 40% capacity and check every two
   months, recharging to 40% capacity as needed.
 • Fully charge the battery before using after extended storage. 
 • Store in a cool, dry place between 40˚F and 80˚F for best results.

Battery Storage

Using the Battery

Содержание Badger 100





















Отзывы: