Badger Meter RCV SRD960, Быстрый старт

Страница: 7 / 12

Electrical Connections
*! To access the electrical connection compartment, loosen
the protection screw and open the cover . This screw also
unlocks the cover for the electronic compartment .
A
B
#2
Earth connection
in electrical connection
compartment.
Figure 9: Electrical connection compartment
Setpoint
SRD960-xD (Intelligent w/o comm.)
SRD960-xH (HART)
SRD960-xA (Analog)
Electric terminal A
Input 4 . . . 20 mA
11+ 12-
SRD960-xF (FoxCom digital)
Electric terminal A 11+ 12-
Supply voltage 13 . . . 36V DC
SRD960-xP (PROFIBUS PA)
SRD960-xQ (FIELDBUS FF)
Electric terminal A
Bus connection acc. to IEC 1158-2
Supply voltage 9 . . . 32V DC
11 12
Limit Switch
SRD960-xxxT or U
Two-wire proximity sensors,
according to DIN 19234 or
NAMUR
Electric terminal B
Switching amplifier
Switching amplifier
41+ 42- 51+ 52-
SRD960-xxR
Electric terminal B
Contact 2
Contact 1
Supply voltage 10 . . . 30V DC
41+ 43- 42 52
SRD960-xxxV
WARNING
FOR INFORMATION ON CONNECTING MICRO SWITCHES,
SEE THE USER MANUAL AND COMPLY WITH THE SAFETY
REQUIREMENTS LISTED THEREIN.
Additional I/O
Two binary outputs
(SRD960-xxP)
Two-wire system, according
to DIN 19234 or switched
output
Electric terminal B
External power supply
External power supply
81+ 82- 83+ 84-
Two binary inputs
(SRD960-xxB)
Binary inputs with internal
supply for connection of
sensors or switches (switch
closed for normal operation)
Electric terminal B 15+ 16- 13+ 14-
Position feedback 4…20 mA
and 1 Alarm (SRD960-xxQ)
Analog input 4…20 mA and
binary output . Two-wire
system, according to DIN
19234 or switched
Electric terminal B 81+ 82- 31+ 32-
Analog output 4 to 20 mA,
Two-wire system, supplied with external
power supply.
External power supply
Two binary in-/outputs
(SRD960-xxE)
Two-wire system, according
to DIN 19234 or switched
input/output
Electric terminal B 81+ 82- 83+ 84-
Binary in-/output,
Two-wire system, supplied with external
power supply
Binary in-/output,
Two-wire system, supplied with external
power supply
Connections
Page 7 May 2018 POS-QS-00502-EN-02